--按截止日考虑库存分配(全部物料及工序)ide
DECLARE @dueDate DATETIME --截止交期spa
SELECT @dueDate = T0.T_DueDate FROM OFPR T0 WHERE T0.T_DueDate = [%0]ip
SELECT @dueDate = '[%0]'产品
---------------------------------------------------------------------------------------------it
-- ======================================io
-- 程序：库存分配表-全部物料及工序class
-- wangtp扩展
-- 2017.5.10循环
-- 预测未完工部分为未清需求 20170628程序
--按截止日考虑库存分配(全部物料及工序)
--DECLARE @dueDate DATETIME --截止交期
--SELECT @dueDate = T0.T_DueDate FROM OFPR T0 WHERE T0.T_DueDate = [%0]
--SELECT @dueDate = '[%0]'
--EXEC [U_P_STOCK2NEED_WITHOUT_ISSUED] @dueDate
-- ======================================
ALTER PROCEDURE [dbo].[U_P_STOCK2NEED_WITHOUT_ISSUED]
(
@dueDate DATETIME
)
AS
BEGIN
DECLARE @owe_line_count INT
DECLARE @level INT
DECLARE @maxLevel INT --需求计算的最大层级
--截止日默认为下个月最后一天
IF @dueDate IS NULL OR @dueDate = '19000101' OR @dueDate < CONVERT(VARCHAR(8),GETDATE(),112)
BEGIN
SET @dueDate = DATEADD(dd,-1, DATEADD(MM,2,GETDATE()))
SET @dueDate = DATEADD(dd,-DATEPART(dd,@dueDate),@dueDate)
SET @dueDate = CONVERT(VARCHAR(8),@dueDate,112)
END
--SELECT @end
----------------------------------------------------------------------------------------------------------------------------------------
--T1:仅涉及未清销售订单的产品取得BOM清单，并计算各组件在其中的需求优先级关系 BOM里面子件不能再扩展的，优先级最大，其父件优先级-1
--T1:父件、子件、基数、BOM展开层级、需求计算优先级
CREATE TABLE #BOM(Father NVARCHAR(20),ItemCode NVARCHAR(20),BaseQty DECIMAL(19,6),[Level] INT)
SET @level = 1
--2.1 订单涉及BOM分解首层
INSERT #BOM
SELECT T0.Code Father,T1.Code ItemCode,CAST(SUM(T1.Quantity)/T0.Qauntity AS DECIMAL(19,6)) Quantity ,0 [Level]
--INTO #BOM
FROM OITT T0
INNER JOIN ITT1 T1 ON T0.Code = T1.Father AND T1.[Type]= '4'
--WHERE T0.Code IN (SELECT DISTINCT T1.ITEMCODE FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocStatus= 'O' AND T1.LINESTATUS = 'O')
GROUP BY T0.Code,T1.Code,T0.Qauntity
-- 第三步 排需求优先级 Level----------------------------------------
--3.1 末级叶子节点处理
SET @level = 99
UPDATE T0 SET T0.[Level] = @level
FROM #BOM T0
LEFT JOIN #BOM T1 ON T0.ItemCode = T1.Father
WHERE T1.Father IS NULL
--3.2 非末级逐级处理
WHILE(@level > 0)
BEGIN
UPDATE #BOM SET [Level] = @level - 1 WHERE ItemCode IN (SELECT DISTINCT FATHER FROM #BOM WHERE [Level] = @level)
IF @@ROWCOUNT = 0 BREAK
SET @level = @level - 1
END
--减去落差
UPDATE #BOM SET [Level] = [Level] - (@level - 1)
--求最大层级
SELECT @maxLevel = MAX([Level]) FROM #BOM
--可用数量
SELECT T0.ItemCode,ISNULL(SUM(CASE WHEN T0.WHSCODE NOT IN('C08','C38') THEN T0.OnHand ELSE 0 END),0) OnHand
,ISNULL(SUM(CASE WHEN T0.WhsCode NOT LIKE 'C3%' AND T0.WHSCODE <> 'C08' THEN T0.OnHand ELSE 0 END ),0) AS OnHand_GK
,ISNULL(SUM(CASE WHEN T0.WhsCode LIKE 'C3%' AND T0.WhsCode <> 'C38' THEN T0.OnHand ELSE 0 END ),0) AS OnHand_TA
,ISNULL(SUM(CASE WHEN T0.WhsCode = 'C08' THEN T0.OnHand ELSE 0 END ),0) AS OnQC_GK
,ISNULL(SUM(CASE WHEN T0.WhsCode = 'C38' THEN T0.OnHand ELSE 0 END ),0) AS OnQC_TA
INTO #TMP_ONHAND
FROM OITW T0
WHERE T0.OnHand >0
AND T0.WhsCode NOT IN ('C01','C04','C10','C13','C14','C15','C16','C18','C19','C34','C99')
GROUP BY T0.ItemCode
----按BOM扩展--------------------------------------------
CREATE TABLE #TEMP_NEED_ALL
(
[LEVEL] INT, --需求等级
Father NVARCHAR(20), --分解从
ItemCode NVARCHAR(20), --需求物料
QtyNeedF DECIMAL(19,6), --父件需求数量
BaseQty DECIMAL(19,6), --基数
QtyNeed DECIMAL(19,6), --按订单数展开毛需求量
QtyIssued DECIMAL(19,6) --已发料（父件子件匹配 行发料数量 - 完工数*基数 舍负值为0）
)
--订单需求写入需求表
INSERT INTO #TEMP_NEED_ALL
SELECT DISTINCT CASE WHEN T21.Father IS NULL THEN 0 WHEN T21.ItemCode IS NOT NULL THEN T21.Level ELSE @maxLevel END [LEVEL]
,'' Father,T20.ItemCode,
T20.OpenQty [QtyFather],1.00 [BaseQty],T20.OpenQty [QtyNeed],0.00 [QtyIssued]
FROM
(
--合计需求
SELECT T10.[ItemCode],SUM(T10.OpenQty) OpenQty,MIN(T10.ShipDate) ShipDate
--INTO #TEMP_OPEN_NEED
FROM
(
SELECT T1.[ItemCode],T1.[OpenCreQty] OpenQty,T1.ShipDate
FROM [dbo].ORDR T0
INNER JOIN RDR1 T1 ON T1.DocEntry=T0.DocEntry
--LEFT JOIN OSLP T2 ON T2.SlpCode=T0.SlpCode
WHERE T0.DocStatus = 'O' AND T0.DocType ='I' AND T1.LineStatus='O'
AND T1.ShipDate <= @dueDate
UNION ALL
SELECT T10.ItemCode,T10.Quantity - ISNULL(SUM(T11.CmpltQty),0) Quantity,T10.[ShipDate]
FROM
(
SELECT T0.Code, T1.ItemCode,SUM(T1.Quantity) Quantity ,MIN(T1.[Date]) [ShipDate]
--SELECT T1.ItemCode,T1.Quantity ,T1.[Date] [ShipDate]
FROM OFCT T0 INNER JOIN FCT1 T1 ON T0.AbsID = T1.AbsID
WHERE T1.[Date] BETWEEN '20170401' AND @dueDate AND T1.Quantity > 0
GROUP BY T0.Code,T1.ItemCode
)T10
LEFT JOIN OWOR T11 ON T10.Code = T11.PickRmrk AND T10.ItemCode = T11.ItemCode
GROUP BY T10.ItemCode,T10.Quantity,T10.ShipDate
HAVING T10.Quantity > ISNULL(SUM(T11.CmpltQty),0)
)T10
GROUP BY T10.[ItemCode]
) T20
LEFT JOIN (SELECT DISTINCT Father,ItemCode,Level FROM #BOM) T21 ON T20.[ItemCode] = T21.ItemCode
--最终逐级汇总需求
CREATE TABLE #TEMP_NEED_SUM
(
[LEVEL] INT, --需求等级
ItemCode NVARCHAR(20), --需求物料
QtyNeed DECIMAL(19,6), --按订单数展开需求量
OnHand DECIMAL(19,6), --在库存数量
OnHand_GK DECIMAL(19,6), --灌口库存
OnHand_TA DECIMAL(19,6), --同安库存
QtyEnd DECIMAL(19,6), --溢缺
OnQC_GK DECIMAL(19,6), --灌口待检数量
OnQC_TA DECIMAL(19,6) --同安行检数量
)
--将0级汇总写入最终表
SET @level = 0;
INSERT INTO #TEMP_NEED_SUM
SELECT T10.[LEVEL],T10.ItemCode,T10.QtyNeed,T11.OnHand,T11.OnHand_GK
,T11.OnHand_TA,ISNULL(T11.OnHand,0) - T10.QtyNeed [QtyEnd],T11.OnQC_GK,T11.OnQC_TA
FROM #TEMP_NEED_ALL T10
LEFT JOIN #TMP_ONHAND T11 ON T10.ItemCode = T11.ItemCode
WHERE T10.[LEVEL] = @level
--循环计算下级需求
WHILE(1=1)
BEGIN
--合计需求求下阶需求
INSERT INTO #TEMP_NEED_ALL
SELECT T1.[LEVEL], T0.ItemCode [Father],T1.ItemCode
,ABS(T0.QtyEnd) QtyNeedF,T1.[BaseQty],SUM(CEILING(ABS(T0.QtyEnd)*T1.[BaseQty])) [QtyNeed],0 [QtyIssued]
FROM #TEMP_NEED_SUM T0
INNER JOIN #BOM T1 ON T0.ItemCode = T1.Father
WHERE T0.[Level] = @level AND T0.QtyEnd < 0 --上级库存及发料不足时时才计算下阶物料
GROUP BY T1.[LEVEL],T0.ItemCode,T1.ItemCode,T0.QtyEnd,T1.[BaseQty]
--汇总需求下阶需求
SELECT @level = @level + 1
INSERT INTO #TEMP_NEED_SUM
SELECT T10.[LEVEL],T10.ItemCode,SUM(T10.QtyNeed) QtyNeed,T11.OnHand,T11.OnHand_GK
,T11.OnHand_TA,ISNULL(T11.OnHand,0) - SUM(T10.QtyNeed ) [QtyEnd],T11.OnQC_GK,T11.OnQC_TA
FROM #TEMP_NEED_ALL T10
LEFT JOIN #TMP_ONHAND T11 ON T10.ItemCode = T11.ItemCode
WHERE T10.[LEVEL] = @level
AND T10.QtyNeed >= T10.QtyIssued --针对该父件-子件对 发料已超过需求数量 则不进入汇总了(不须要分摊库存量)
GROUP BY T10.[LEVEL],T10.ItemCode,T11.OnHand,T11.OnHand_GK,T11.OnHand_TA,T11.OnQC_GK,T11.OnQC_TA
IF @level > @maxLevel+1 BREAK
END
SELECT DISTINCT
@dueDate [截止日期]
,T10.ItemCode [物料编号]
,T10.InvntryUom [单位]
,T11.QtyNeed [毛需求]
,T12.OnHand [可用库存]
,T12.OnHand_GK [灌口库存]
,T12.OnHand_TA [同安库存]
,ISNULL(T11.[QtyEnd],T12.OnHand) [溢缺]
,ISNULL(T13.OnOrder,0) [采购/生产在途]
,ISNULL(T12.OnQC_GK,0) [灌口待检]
,ISNULL(T12.OnQC_TA,0) [同安待检]
,T10.ItemName [物料描述]
,T10.LeadTime [提早期-天(未考虑)]
--,T10.ShipDate [交期]
,T10.Spec [工序]
,T10.U_Location [储位]
,CASE T10.U_Factory WHEN 'GK' THEN '灌口' WHEN 'TN' THEN '同安' ELSE '-' END [工厂]
,T10.TaxCtg [工做中心]
,T10.U_Buyer [物料采购员]
,T15.[Level] [需求等级]
,'C02-原料仓库/C03-成品仓库/C05-委外仓库/C06-配件仓/C11-包材仓库/C17-高仪仓库/C20-非生产类仓库/C31-同安三楼龙头仓库/C32-同安四楼配件仓/C33-同安成品仓/C39-同安包材仓' [考虑库存的仓库]
FROM OITM T10
LEFT JOIN #TEMP_NEED_SUM T11 ON T10.ItemCode = T11.ItemCode
LEFT JOIN #TMP_ONHAND T12 ON T10.ItemCode = T12.ItemCode
LEFT JOIN
(
SELECT U0.ItemCode,SUM(U0.OnOrder) OnOrder
FROM(
SELECT ItemCode,PlannedQty - CmpltQty OnOrder
FROM OWOR
WHERE Status IN ('P','R') AND DueDate <= @dueDate AND PlannedQty > CmpltQty
UNION ALL
SELECT T1.ItemCode ,OpenCreQty
FROM OPOR T0
INNER JOIN POR1 T1 On T0.DocEntry = T1.DocEntry
WHERE T0.DocStatus = 'O' AND T0.DocType = 'I' AND T1.LineStatus = 'O' AND T1.ShipDate <= @dueDate
)U0
GROUP BY ItemCode
)T13 ON T10.ItemCode = T13.ItemCode
LEFT JOIN
(
SELECT ItemCode,SUM(QtyNeed) QtyNeed0,SUM(QtyIssued) QtyIssued0
FROM #TEMP_NEED_ALL
GROUP BY ItemCode
)T14 ON T10.ItemCode = T14.ItemCode
LEFT JOIN
(
SELECT DISTINCT ItemCode ,[LEVEL] FROM #BOM
)T15 ON T10.ItemCode = T15.ItemCode
ORDER BY T10.ItemCode
FOR BROWSE
/* 数据追溯
SELECT * FROM #TEMP_NEED_SUM WHERE ItemCode IN ('TDB2112-00-41C-5030','2DB2112-00-41A-000', '6G03-DB2112-01-41A0')
SELECT * FROM #TEMP_NEED_ALL WHERE ItemCode IN ('TDB2112-00-41C-5030','2DB2112-00-41A-000', '6G03-DB2112-01-41A0')
*/
DROP TABLE #TEMP_NEED_SUM
DROP TABLE #TEMP_NEED_ALL
DROP TABLE #TMP_ONHAND
DROP TABLE #BOM
END