在本身的环境变量中配置好go的pathnode
77 export GOROOT=/usr/local/go 78 export PATH=$PATH:$GOROOT/bin 79 export GOPATH=/data/gowork
1.在官网下载 nvim-linux64.tar.gz 这个安装包
tar -zxvf nvim-linux64.tar.gz 解压后使用 ln -s创建连接python
ln -s /root/nvim/nvim-linux64/bin/nvim nvim #在配置文件中添加声明，使nvim成为关键字 export PATH=$PATH:/root/nvim/nvim-linux64/bin
而后就能够像使用vim同样使用nvim了linux
由于后续安装的一些代码补全插件须要这两个组件的支持，因此先提早安装git
1.先去https://npm.taobao.org/mirror...
2.tar zxvf 解压到想要存放的文件目录下
3.在/etc/profile 文件中声明github
export PATH=$PATH:/root/node/node-v14.16.1-linux-x64/bin
4.设立连接golang
ln -s /root/node/node-v14.16.1-linux-x64/bin/npm ~/npm ln -s /root/node/node-v14.16.1-linux-x64/bin/node ~/node #source 让配置的path生效 source /etc/profile
[root@VM-0-16-centos ~]# npm -v 6.14.12 [root@VM-0-16-centos ~]# node -v v14.16.1 检查版本成功即安装成功
1.下载python安装包
https://www.python.org/ftp/py...typescript
2.tar -xzf Python-3.8.6rc1.tgz
3.进入解压完的目录 执行以下命令， 路径为想安装的py路径
./configure --prefix="/root/python3.8"
4.等执行完后继续在解压完的目录下依次执行
make
make install
5.编译完成后在环境变量中添加npm
alias python3=/root/python3.8/bin/python3.8 alias pip3=/root/python3.8/bin/pip3.8
而后查看
pthone3 -v
pip3 -v
检验安装成功json
1.建立 mkdir -p ~/./config/nvim 文件夹
而后在~/./config/nvim中建立vim
2.git clone https://github.com/junegunn/v...
进入vim-plug目录将 plug.vim这个文件拷贝到刚刚建立的autoload文件夹中
3.nvim 打开init.vim
输入
" 插件开始的位置
call plug#begin('~/.vim/plugged')
Plug 'fatih/vim-go', { 'tag': '*' }
Plug 'neoclide/coc.nvim',{'branch':'release'}
Plug 'Valloric/YouCompleteMe'
" 插件结束的位置，插件所有放在此行上面
call plug#end()
这三个是go的主要插件
这个是vim-go相关的配置，也是写在init.vim里就好了。（不要和插件内容写混了）
" vim-go let g:go_fmt_command = 'goimports' let g:go_autodetect_gopath = 1 " let g:go_bin_path = '$GOBIN' let g:go_highlight_types = 1 let g:go_highlight_fields = 1 let g:go_highlight_functions = 1 let g:go_highlight_function_calls = 1 let g:go_highlight_extra_types = 1 let g:go_highlight_generate_tags = 1 " Open :GoDeclsDir with ctrl-g nmap <C-g> :GoDeclsDir<cr> imap <C-g> <esc>:<C-u>GoDeclsDir<cr> augroup go autocmd! autocmd BufNewFile,BufRead *.go setlocal noexpandtab tabstop=4 shiftwidth=4 augroup END
4.而后打开一个nvim窗口，在命令模式下输入 PlugInstall 安装插件
5.安装完毕后再在命令模式下输入 GoInstallBinaries 安装vim-go所须要的一些插件
这个默认是安装在gobin目录下的，若是下载失败输入
export GOPROXY=https://goproxy.io,direct
再重试下
6.再打开nvim 在命令模式下输入 CocInstall coc-go coc-json coc-snippets coc-yaml
安装coc相关的插件
最后是一些init.vim的配置
"==============================================================================
" vim 基础配置
"==============================================================================
"显示行号
set number
"开启语法高亮
set syntax=on
"设置以unix的格式保存文件"
set fileformat=unix
"设置table长度
set tabstop=4
"同上
set shiftwidth=4
"文件编码
set fenc=utf-8
"启用鼠标
set mouse=a
"突出显示当前行
"set cursorline
"文件编码
set encoding=utf-8
"自动缩进
set autoindent
set softtabstop=4
"自动缩进所使用的空白长度指示
set shiftwidth=4
set expandtab
"==============================================================================
" vim plug
"==============================================================================
call plug#begin('~/.vim/plugged')
Plug 'scrooloose/nerdtree'
Plug 'vim-airline/vim-airline'
Plug 'vim-airline/vim-airline-themes'
Plug 'mhinz/vim-startify'
Plug 'fatih/vim-go'
Plug 'neoclide/coc.nvim', {'branch': 'release'}
call plug#end()
"==============================================================================
" vim plug config
"==============================================================================
"----------------------------------------------------------------------------
" NERDTree config
"----------------------------------------------------------------------------
" F2键快速调出和隐藏它
map <F2> :NERDTreeToggle<CR>
" 关闭vim时，若是打开的文件除了NERDTree没有其余文件时，它自动关闭，减小屡次按:q!
autocmd bufenter * if (winnr("$") == 1 && exists("b:NERDTree") && b:NERDTree.isTabTree()) | q | endif
" 打开vim时自动打开NERDTree
autocmd vimenter * NERDTree
"设定 NERDTree 视窗大小
let g:NERDTreeWinSize = 25
"----------------------------------------------------------------------------
" vim-go config
"----------------------------------------------------------------------------
let g:go_fmt_command = 'goimports'
let g:go_autodetect_gopath = 1
" let g:go_bin_path = '$GOBIN'
let g:go_highlight_types = 1
let g:go_highlight_fields = 1
let g:go_highlight_functions = 1
let g:go_highlight_function_calls = 1
let g:go_highlight_extra_types = 1
let g:go_highlight_generate_tags = 1
" Open :GoDeclsDir with ctrl-g
nmap <C-g> :GoDeclsDir<cr>
imap <C-g> <esc>:<C-u>GoDeclsDir<cr>
augroup go
autocmd!
autocmd BufNewFile,BufRead *.go setlocal noexpandtab tabstop=4 shiftwidth=4
augroup END
"----------------------------------------------------------------------------
" coc.vim config
"----------------------------------------------------------------------------
" TextEdit might fail if hidden is not set.
set hidden
" Some servers have issues with backup files, see #649.
set nobackup
set nowritebackup
" Give more space for displaying messages.
set cmdheight=2
" Having longer updatetime (default is 4000 ms = 4 s) leads to noticeable
" delays and poor user experience.
set updatetime=300
" Don't pass messages to |ins-completion-menu|.
set shortmess+=c
" Always show the signcolumn, otherwise it would shift the text each time
" diagnostics appear/become resolved.
if has("patch-8.1.1564")
" Recently vim can merge signcolumn and number column into one
set signcolumn=number
else
set signcolumn=yes
endif
" Use tab for trigger completion with characters ahead and navigate.
" NOTE: Use command ':verbose imap <tab>' to make sure tab is not mapped by
" other plugin before putting this into your config.
inoremap <silent><expr> <TAB>
\ pumvisible() ? "\<C-n>" :
\ <SID>check_back_space() ? "\<TAB>" :
\ coc#refresh()
inoremap <expr><S-TAB> pumvisible() ? "\<C-p>" : "\<C-h>"
function! s:check_back_space() abort
let col = col('.') - 1
return !col || getline('.')[col - 1] =~# '\s'
endfunction
" Use <c-space> to trigger completion.
if has('nvim')
inoremap <silent><expr> <c-space> coc#refresh()
else
inoremap <silent><expr> <c-@> coc#refresh()
endif
" Use <cr> to confirm completion, `<C-g>u` means break undo chain at current
" position. Coc only does snippet and additional edit on confirm.
" <cr> could be remapped by other vim plugin, try `:verbose imap <CR>`.
if exists('*complete_info')
inoremap <expr> <cr> complete_info()["selected"] != "-1" ? "\<C-y>" : "\<C-g>u\<CR>"
else
inoremap <expr> <cr> pumvisible() ? "\<C-y>" : "\<C-g>u\<CR>"
endif
" Use `[g` and `]g` to navigate diagnostics
" Use `:CocDiagnostics` to get all diagnostics of current buffer in location list.
nmap <silent> [g <Plug>(coc-diagnostic-prev)
nmap <silent> ]g <Plug>(coc-diagnostic-next)
" GoTo code navigation.
nmap <silent> gd <Plug>(coc-definition)
nmap <silent> gy <Plug>(coc-type-definition)
nmap <silent> gi <Plug>(coc-implementation)
nmap <silent> gr <Plug>(coc-references)
" Use K to show documentation in preview window.
nnoremap <silent> K :call <SID>show_documentation()<CR>
function! s:show_documentation()
if (index(['vim','help'], &filetype) >= 0)
execute 'h '.expand('<cword>')
else
call CocAction('doHover')
endif
endfunction
" Highlight the symbol and its references when holding the cursor.
autocmd CursorHold * silent call CocActionAsync('highlight')
" Symbol renaming.
nmap <leader>rn <Plug>(coc-rename)
" Formatting selected code.
xmap <leader>f <Plug>(coc-format-selected)
nmap <leader>f <Plug>(coc-format-selected)
augroup mygroup
autocmd!
" Setup formatexpr specified filetype(s).
autocmd FileType typescript,json setl formatexpr=CocAction('formatSelected')
" Update signature help on jump placeholder.
autocmd User CocJumpPlaceholder call CocActionAsync('showSignatureHelp')
augroup end
" Applying codeAction to the selected region.
" Example: `<leader>aap` for current paragraph
xmap <leader>a <Plug>(coc-codeaction-selected)
nmap <leader>a <Plug>(coc-codeaction-selected)
" Remap keys for applying codeAction to the current buffer.
nmap <leader>ac <Plug>(coc-codeaction)
" Apply AutoFix to problem on the current line.
nmap <leader>qf <Plug>(coc-fix-current)
" Map function and class text objects
" NOTE: Requires 'textDocument.documentSymbol' support from the language server.
xmap if <Plug>(coc-funcobj-i)
omap if <Plug>(coc-funcobj-i)
xmap af <Plug>(coc-funcobj-a)
omap af <Plug>(coc-funcobj-a)
xmap ic <Plug>(coc-classobj-i)
omap ic <Plug>(coc-classobj-i)
xmap ac <Plug>(coc-classobj-a)
omap ac <Plug>(coc-classobj-a)
" Use CTRL-S for selections ranges.
" Requires 'textDocument/selectionRange' support of LS, ex: coc-tsserver
nmap <silent> <C-s> <Plug>(coc-range-select)
xmap <silent> <C-s> <Plug>(coc-range-select)
" Add `:Format` command to format current buffer.
command! -nargs=0 Format :call CocAction('format')
" Add `:Fold` command to fold current buffer.
command! -nargs=? Fold :call CocAction('fold', <f-args>)
" Add `:OR` command for organize imports of the current buffer.
command! -nargs=0 OR :call CocAction('runCommand', 'editor.action.organizeImport')
" Add (Neo)Vim's native statusline support.
" NOTE: Please see `:h coc-status` for integrations with external plugins that
" provide custom statusline: lightline.vim, vim-airline.
set statusline^=%{coc#status()}%{get(b:,'coc_current_function','')}
" Mappings for CoCList
" Show all diagnostics.
nnoremap <silent><nowait> <space>a :<C-u>CocList diagnostics<cr>
" Manage extensions.
nnoremap <silent><nowait> <space>e :<C-u>CocList extensions<cr>
" Show commands.
nnoremap <silent><nowait> <space>c :<C-u>CocList commands<cr>
" Find symbol of current document.
nnoremap <silent><nowait> <space>o :<C-u>CocList outline<cr>
" Search workspace symbols.
nnoremap <silent><nowait> <space>s :<C-u>CocList -I symbols<cr>
" Do default action for next item.
nnoremap <silent><nowait> <space>j :<C-u>CocNext<CR>
" Do default action for previous item.
nnoremap <silent><nowait> <space>k :<C-u>CocPrev<CR>
" Resume latest coc list.
nnoremap <silent><nowait> <space>p :<C-u>CocListResume<CR>
参考:
https://pokitpeng.github.io/p...
https://learnku.com/articles/...