具体流程太长了,这里记录下思路过程以及坑点。
原文链接:http://www.noobyard.com/article/p-rchyvjzh-ng.html
参考:https://jingyan.baidu.com/article/597a06438b1e5e702b5243c6.html
记得设置大一些的存储空间,推荐80g以上
参考:https://flutterchina.club/setup-macos/
参考:http://www.noobyard.com/article/p-wkfpubuh-be.html
安装VMware Tools增强工具
在菜单栏中选择虚拟机->安装VMware Tools
如果显示驱动被占用,就添加一个驱动。
安装过程中会有权限确认,同意即可
进入flutter项目根目录删除.gitignore文件,这个问题是打开之前创立好的flutter项目配置不正确引起的
ios
with version 10.0
on target CloudLive
because no pl进入flutter项目ios文件夹下Podfile文件下,去掉
**platform :ios, ‘9.0’**的#号注释,原因同上。
打开你flutter工程下ios文件夹下的podfile文件,添加
source ‘https://github.com/CocoaPods/Specs.git’
终端执行:
pod repo update